Xtend Code Compliance Information - Florida

Permit and code-compliance guidance for the Xtend vertical 4-track porch window in Florida. Covers how Xtend fits within Florida's screen enclosure and sunroom provisions, removable-panel requirements, and the scope of what Porch Windows Direct supplies versus what others provide.

What this document covers

This document is written for permitting and inspection in Florida. It explains how Xtend windows align with the state's screen enclosure and sunroom classifications, and what's required for removable panels.

• Screen enclosure and Category I/II sunroom classification under the Florida Building Code
• Removable-panel requirements and decal labeling under FBC Building Section 2002.3.3
• Wind-borne debris and hurricane-protection marketing limits under Florida Statute § 553.842
• Scope of supply: what PWD provides vs. what others provide
• Suggested permit-description language for Florida projects

Key points at a glance

• Positioned as removable, flexible-vinyl-glazed porch-enclosure panels for a non-habitable, unconditioned porch or screen enclosure — not as a conventional exterior window
• Uses 10 mil flexible vinyl, below the 20 mil maximum described for Category I sunrooms, with a full exterior screen included
• Sashes are removable from inside the porch, consistent with Florida's removable-panel provisions
• Not marketed or relied upon as hurricane, impact, or wind-borne-debris protection
• Removable panels require a visible decal noting removal above 75 mph wind speeds, per FBC 2002.3.3

Scope and installation notes

 Porch Windows Direct supplies the window units, mounting screws, and sealant. Framing, structural engineering, trim, permit classification, and decal placement are confirmed with the local building official and design professional. The home's existing exterior wall, windows, and doors remain in place and continue to separate the dwelling from the porch. This guide is a positioning and planning resource, not an engineering evaluation or project-specific code determination — a Florida-licensed design professional and the authority having jurisdiction should confirm each project.